RadioMaster T8 Pro

RadioMaster T8/T8 Pro 2.4GHz 8/16CH Hall Sensor Gimbals OpenTX Compatible D8/D16 & Multi-protocol RF System Mode2 Transmitter for RC Drone

T8 OVERVIEW:

The T8 is RadioMasters entry in to the exciting world of RC. With 8 channels, built in battery and Multi-Module powered CC2500 RF chip, it is ready to command your D8 and D16 models right after the first charge!

The T8 runs a specially configured version of OPENTX that is pre-programmed for simple easy use. No complicated setup, no firmware updates or radio programming. Simply select the right protocol with a simple stick input and bind! That’s it, now go out and fly!

Featuring a built in 1000mah battery for up to 6 hours of operation on a single charge and built in USB charging to make topping up the battery easy and convenient. Its compact size and ergonomic design with fold away finger rests, make it the ideal travel or whoop companion.

Like to spend time playing simulators when you cannot get out to fly? T8 has USB-C Simulator support too! Play your favorite sims with the supplied USB cable, no special adapters needed. The T8 can even support voice alert functions by simply adding a SD card and downloading the SD card sound pack from our website.

The T8 features high precision quad ball bearing Potentiometer gimbals and CNC aluminum switch nuts for a touch of style.

T8 Pro OVERVIEW:

The T8 Pro is our most compact fully OpenTX supported radio yet! Based on the T8 Design the T8 Pro unlocks the power of OpenTX Firmware programmability, Companion PC software and firmware updates. With 16 channels, built in battery and Multi-Module powered C2500 RF chip the T8 Pro is ready to command your favorite models right after the first charge!

The T8 Pro is compatible with all CC2500 protocols supported by the Multi-Module project such as Frsky D8, D16, Futabas S-FHSS, RadioLink, Graupner HoTT and more! Just select the right protocol via the menu system with the included clip on OpenTX screen control unit and fully customize your model configuration with the full capability of OpenTX at your fingertips.

Featuring a built in 1000mah battery for up to 6 hours of operation on a single charge and built in USB charging to make topping up the battery easy and convenient. Its compact size and ergonomic design with fold away finger rests, make it the ideal travel or whoop companion.

Like to spend time playing simulators when you cannot get out to fly? The T8 Pro has USB-C Simulator support too! Play your favorite sims with the supplied USB cable, no special adapters needed. The T8 Pro has full OpenTX sound and script support by simply adding an SD card in the SD card slot with OpenTX SD contents.

The T8 Pro features high precision quad ball bearing HALL sensor gimbals and CNC aluminum switch nuts with matching CNC machined aluminum gimbal face plates for a touch of class.

Description:

Brand Name: RadioMaster

Item Name: T8/T8 Pro Transmitter

T8 Transmitter:

Size:160*130*45mm

Weight: 218g

Frequency: 2.400GHZ-2.480GHZ

RF Module: Multi-Protocol Module Compatible Single Chip (CC2500)

Protocol Options: D8/D16 V1 FCC/D16 V1 LBT/D16 V2 FCC/D16 V2 LBT

Transmission power: 20dbm

Antenna gain: 2db

Range: >1km @ 20dbm(depending on the receiver)

Battery: Built in 3.7v 1000mah Lithium battery

Charging: Built in USB-C charging

Firmware: OpenTX T8 Edition(Special T8 Edition, non-configurable)*

Channels: Up to 8 channels (depending on the model/receiver)

Gimbal: High-precision quad bearing potentiometer sensor gimbal

Voice support: Yes(SD Card required)

Option Accessories: 128*64 LCD and OpenTX T8 Pro firmware

*Does not support or require OpenTX companion or user programming

T8 Pro Transmitter:

Size:160*130*60mm

Weight: 266g

Frequency: 2.400GHZ-2.480GHZ

RF Module: Multi-Protocol Module Compatible Single Chip (CC2500)

Protocol Options: All CC2500-Frsky, S-FHSS, Radiolink Graupner hott and more*

Transmission power: 20dbm

Antenna gain: 2db

Range: >1km @ 20dbm(depending on the receiver)

Battery: Built in 3. 7v 1000mah Lithium battery

Charging: Built in USB-C charging

Firmware: OpenTX-Multiprotocol-TX-Module

Channels: Up to 16 channels(depending on the model/receiver)

Screen: Clip on 128x64 LCD and OpenTX control module

Gimbal: High-precision quad ball bearing HALL Sensor gimbal

Voice support: Yes (SD Card required)

*Visit https://www.multi-module.org/to learn more

Package Included:

1 x T8/T8 Pro Transmitter (Optional)