iFlight Chimera5 LR DC HD DJI Caddx Vista Nebula Pro PNP

Introducing our first ultra-light Long Range 5 inch BNF for every terrain. Newest iFlight Beast hardware on board coupled with our XING 2004 motors in different kv classes. For a 5″ mini quad, you can make it more efficient by simply using a less aggressive motor and propeller combination (lower KV and lower pitch).  Get flight times above 25min using at least Li-On 4S 3000mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!

GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way!

CaddX Vista with two optional cameras available. Original DJI Vista cam or the lighter and smaller CaddX Nebula.

Outstanding digital FPV experience in 720p directly on your goggles. Custom iFlight 150mm LR antenna for best signal coverage even at long distance.

HIGHLIGHTS:

-Mini long-range quad

-XING 2004 3000KV(Crusiser) / 3800KV (Speed Cruiser) Ultralight motors

-Deadcat Frame body 

-DC (DeadCat geometry) bottom plate available (additional item, not included, no props in view) 

-GPS pre-installed for more safety at distance

-Beast F7 +45A 4in1 ESC AIO

-Naked GoPro ready

-360° TPU protection, Vista cam protection and antenna mounts

-Caddx Vista Digital HD System / Caddx Nebula Digital HD System

PRE-TUNED & PRE-SETUP:

-Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

-To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

-Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

-Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

-GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour.

-Please check our linked article on "GPS Rescue Mode // Setup" 

FRAME // ：Chimera4

-Wheelbase: 189mm

-Main body dimension: 136.8*114.8mm 

-Bottom to top distance: 28mm

-Arm thickness: 4mm

-Bottom plate thickness: 4mm

-Top plate thickness: 2mm

-TPU Camera plate thickness: 2mm 

-FC: 25.5*25.5mm/20*20mm/16*16mm

-FPV Cam: 19mm Micro / 20mm 

FC // Beast F7 AIO

Specification:

• MCU: BGA-STM32F745
• Gyro: MPU6000
• Blackbox: 8Mb Onboard Flash
• BEC output: 5V 2.5A 
• Barometer: BMP280
• Connector: Micro-USB
• OSD: AT7456E
• FC Firmware：IFLIGHT_F745_AIO 
• Mounting pattern: 25.5*25.5mm φ3mm
• Dimensions: 32.5*32.5mm
• Weight: 8.5g

ESC // 45A 2-6S

Specification:

• Uarts: 5
• Current Sensor: Yes
• Input: 2-6S LIPO
• Current scale: 200
• Constant: 45A / Burst: 50A
• BLHeli: BLHeli-S
• Telemetry: no
• ESC Firmware: BlheliS G-H-30
• Mounting pattern: 25.5*25.5mm/Φ3mm
• Dimensions: 32.5*32.5mm

NOTE: F.PORT protocol RX input support, telemetry not supported.

Additional Suggested Parts (not included)

-4S 850mAh / 4S 1100mAh

-TPU Naked GoPro Mount 

-DJI HD FPV Goggles

-Radio Controller

-DJI Remote Controller (Mode 1/ Mode 2)

​Note：The camera mount donot included