A frame designed by FPV racing and acro enthusiasts with versatility in component placement. Crossbones is a pod-like design with super low drag yet still allows a GoPro to be mounted.

Our new QXC carbon fiber plates are constructed of the highest strength standard modulus fibers available - T700. These never-twisted carbon fibers are prepregged then bonded into a high strength armor plate. T700 fiber is used in a variety of industrial and recreational applications, including pressure vessels such as natural gas storage tanks and SCUBA breathing tanks.

The multipurpose antenna mount made of tough flexible TPU accommodates VAS Minion, Luminier Axii, Axii stubby, or TBS Unify/SMA and mounts for standard RC "rabbit-ears" or a TBS Crossfire T-style antennae. You get a color coordinated set of standoffs, micro camera mount, and the multipurpose antenna mount.

Features

QXC Carbon Fiber Plate with lifetime airframe warranty!
Weight: 85g
True X for 6" propellers, 236mm motor to motor
20mm short height keeping the Center of Gravity very close to the Center of Thrust
Anodized aluminum standoffs with knarled texture
Flex TPU mounts for antennae and micro FPV camera
Optional Flex TPU GoPro Session and Hero mounts available.
Motor mounting from 12 x 12mm through 19 x 19mm center-to-center
All parts compatible with V1
Fully independently removable arms (Isolated from Flight Stack)
Embedded nuts allowing simple installation and removal with eight titanium alloy screws
Ultra thin profile arms reduces prop drag at the thrust source (9.5mm wide)
Stout 5.0mm arm thickness
Battery options: Top and Bottom mount (Bottom mount allows 0 or 90 degree orientation).
Optional Flex TPU Battery Sleeves available.
Self-adhesive Neoprene foam tape battery pad
Foam landing pads
Crossbones sticker!
AUW dry: 320g (without battery)

Included with every frame

QXC Carbon Fiber Plate with twill weave and matt finish
Titanium alloy M3 core screws and M3 aluminum screws
20mm aluminum anadoized knarled standoffs
Flex TPU mounts for antennae and micro FPV camera
Nylon hardware for low profile FC/PDB stack
25cm Quadrysteria anti-slip Battery strap
Self-adhesive Neoprene foam tape battery pad
Four custom high density foam landing pads
Exploded assembly view

Recommended Electronics

Matek F405-CTR AIO Flight Controller (integrated PDB and OSD)
ESCs: BLHeli_S DSHOT capable 30 Amp
Motors: 2205, 2206, 2306, 2207 near 2300KV with 4S LiPo, near 1600kv with 6S LiPo
DALPROP T6040C Cyclone propellers
XT60 battery pigtail

Recommended FPV Electronics

Matek VTX-HV 25/200/500mW 5.8GHz Video Transmitter
Runcam Micro Sparrow 2
VAS Minion MMCX antenna (1pc)

Optional Flex TPU Accessories!

GoLo kit - Color change kit 20mm short stack
GoPro Hero mount made of flexible TPU
GoPro Session mount (top center mount) made of flexible TPU.
Turtle Mode Fin made of flexible TPU.
Battery Protective Sleeve made of flexible TPU
Backpack - Combined GoPro and Battery Sleeve (top mount) made of flexible TPU

Lifetime Airframe Warranty
If a high speed crash results in breakage, Quadrysteria is offering a "no questions asked" limited lifetime warranty for the V2 Crossbones frame (made with QXC carbon fiber). Parts covered are: all carbon fiber parts, all M3 aluminum standoffs, all M3 aluminum screws, all M3 titanium alloy screws.

См. также

Запчасти для Quadrysteria Crossbones 6" V2

Рамы 6"

Свежие скидки, купоны, новинки в наших каналах: