Свежие скидки, купоны, новинки в наших каналах:
Регуляторы ESC 4-в-1
Группа ВКонтакте
Holybro Tekko32 F3 Metal 65A 4in1
Коптеры → Гоночные FPV-дроны → Регуляторы ESC → Регуляторы ESC 4-в-1 → 65A 4в1 → Holybro Tekko32 F3 Metal 65A 4in1
Holybro Tekko32F3 Metal 65A BLheli_32 4-6S 4in1 ESC DShot1200 w/ F3 MCU & Current Sensor for FC Drone FPV Racing
Introducation:
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. using metal case mosfet for better Heat dissipation.
We tested in short time on 220A intotal. The actual performance will only limited by the air flow.
Specification:
Brand Name: Holybro
Model: Tekko32F3 Metal
Item Name: 65A BL_32 32Bit DShot1200 4 in 1 ESC
Introducation:
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed. using metal case mosfet for better Heat dissipation.
We tested in short time on 220A intotal. The actual performance will only limited by the air flow.
Specification:
Brand Name: Holybro
Model: Tekko32F3 Metal
Item Name: 65A BL_32 32Bit DShot1200 4 in 1 ESC
Con. Current: 65A
Peak Current: 80A
Input Voltage: 4-6S Lipo Support
Ext. cap needed for 6s (470uf 35v for 6s usage)
- F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz
Size: 42x42mm
Mounting Hole: 30.5x30.5mm
Mounting Hole: 30.5x30.5mm
Weight: 12g
Notice:
1. The air flow is very import if you want to run this 4in1 in high current.
2. The input cable(from lipo to 4in1), should be good soldered, and at least 12AWG
3. Please use non-metallic isolation standoffs (marked in red in the diagram above) for the mounting holes on the ESC.
Because mounting holes and motor pad are connected.
Features:
- The 4in1 has onboard analog current sensor, and TLM function(then no current reading over TLM)
- Using metal case mosfet for better Heat dissipation
- BLheli_32 firmware, support Oneshot, Multishot, Dshot150, DShot300, DShot600 and DShot1200
Package Included:
Notice:
1. The air flow is very import if you want to run this 4in1 in high current.
2. The input cable(from lipo to 4in1), should be good soldered, and at least 12AWG
3. Please use non-metallic isolation standoffs (marked in red in the diagram above) for the mounting holes on the ESC.
Because mounting holes and motor pad are connected.
Features:
- The 4in1 has onboard analog current sensor, and TLM function(then no current reading over TLM)
- Using metal case mosfet for better Heat dissipation
- BLheli_32 firmware, support Oneshot, Multishot, Dshot150, DShot300, DShot600 and DShot1200
Package Included:
1x Tekko32 F3 Metal 4in1 ESC
1x 470uF 35V Electrolytic Capacitor
1x 8pin to 8pin 1mm pitch 65mm Cable
1x 8pin to 8pin 1mm pitch 25mm Cable
Поделиться
Цены на Holybro Tekko32 F3 Metal 65A 4in1 в магазинах
Найдено предложений: 31 (AliExpress6, HiModel1)
| Магазин | Остаток на складе | Цена лота | Цена доставки | Купон / промокод | Количество в лоте | Цена за единицу |
| AliExpress | На складе: 3 | ₽6419 $60 | 1 | ₽6419 $60 | ||
| HiModel | Нет на складе | ₽6733 $68 | 1 | ₽6733 $68 | ||
| AliExpress | На складе много | ₽8640 $81 | 1 | ₽8640 $81 | ||
| AliExpress | На складе много | ₽8876 $83 | 1 | ₽8876 $83 | ||
| AliExpress | На складе много | ₽9709 $91 | 1 | ₽9709 $91 | ||
| AliExpress | На складе много | ₽12213 $114 | + ₽351 $3.28 | 1 | ₽12564 $117 | |
| AliExpress | На складе: 10 | ₽29788 $278 | + ₽10642 $99 | 1 | ₽40430 $378 |
См. также
Свежие скидки, купоны, новинки в наших каналах: